Overview
How do I print in FLITE? How do I use FSU PrintAnywhere?
Prerequisites
Your device must be connected to one of the following: Bulldogs, Bulldogs_devices, FerrisWiFi, FSUatHome
FSU Print Anywhere Printers are located in the following areas:
- Bond Hall
- Brophy/McNerney Halls
- FLITE - near Room 108
- GRX (Grand Rapids)
- Merrill/Travis Halls
- North Hall
- Pickell Hall
- West Campus Community Center
- CSI Office
Printing can only be paid for with Bulldog Bucks. If you had a prior Papercut balance, you may use the remaining amount.
CHECK YOUR BULLDOG BUCKS BALANCE
Resolution
Use these links to quickly find what you are looking for:
Printing From a Mobile Device
2. Click Download button
3. There should be a popup that comes up, select Allow.
4. Go to your Settings app and select the Profile Downloaded button that should be right at the top of the settings.
5. Select Install.
6. If necessary, enter your phone's passcode and everything should be set up to print.
2. Click Install or update button
3. You should be taken to the Google Play Store. Once you are there click Install.
4. Go to the app you just installed and input your Ferris login information.
This example is for Google Docs. Instructions may differ if you are using another app.
1. Select the ellipsis in the top right corner.
2. Click Share and Export.
3. Click Print.
4. Verify that the printer is set to FSU Print Anywhere.
5. There should be a popup that asks for a login. Enter your Ferris login information here.
1. Click the ellipsis at the top of the screen.
2. Click Print.
3. Verify you are printing to FSU Print Anywhere and click the Print button.
4. Click OK when asked to use mobility print.
Printing from Desktop
2. Click Download button.
3. Find and open the file you just downloaded.
4. Run the installation file.
5. Click Continue and accept the terms and conditions until you get to the Installation Type tab.
6. If you want to, change the location of the installations. Then click Install.
7. Click Close to finish the installation.
2. Click Download.
3. Find and run the file you just downloaded.
4. Select your language and click OK.
5. Accept the agreement and Click Next.
6. Select FSU Print Anywhere and click Next.
7. Enter your Ferris login information and click Next.
8. Click Finish.
1. Go to file and click print or hit Cmd+P
2. Change your printer to FSU Print Anywhere and click print.
3. Enter your FSU login information and click OK.
1. Go to file and click print, or hit Ctrl+P
2. Select FSU Print anywhere as your printer and click print
1. Go to the nearest Konica Minolta printer. Printers are located in the following areas:
- David L Eisler Center room 115
- FLITE near room 108
- Bond Hall
- Brophy/McNerney Halls
- Merrill/Travis Halls
- North Hall
- Pickell Hall
- West Campus Community Center
2.
Swipe or tap your Bulldog ID card on the printer. If it asks you to associate your card with your account, enter your username and password on the printer screen.
If you do not have your ID card with you, you can log in by entering your username and password on the printer screen.
3.
Select your print job.
Press Print.
Log out of the printer by pressing the log out button on the top right.